Review : Combo Special: Tenergy Vantage B6s Plus Advanced Balancing Charger + Switch Power Supply
Save Price Combo Special: Tenergy Vantage B6s Plus Advanced Balancing Charger + Switch Power Supply. Purchase around the merchant 's on-line searching and browse testimonials. If you're trying to discover Combo Special: Tenergy Vantage B6s Plus Advanced Balancing Charger + Switch Power Supply with the most efficient worth. This could be the most productive deals for you personally. Exactly where you may possibly discover these item is by on-line looking shops? Read the overview on Combo Special: Tenergy Vantage B6s Plus Advanced Balancing Charger + Switch Power Supply Now, it 's spacial value. for that reason don't shed it.
Main Features : Combo Special: Tenergy Vantage B6s Plus Advanced Balancing Charger + Switch Power Supply
The Best ALL-IN-One Compact Universal Charger in the Market
No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported.
Supports multiple types of battery packs with one single charger! The follow packs are supported:
* NiMH/NiCD 1~15 cells (1.2v to 18v)
* Li-PO/Lithium Ion 1~6 series (3.7v to 22.2v)
* Li-Fe 1~6 series
* Sealed Lead Acid (SLA)
Charger Specifications:
1. Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
2. Build-in Balance
3. Temperature Sensor
4. DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can use Wall Plug AC-DC12V/5A Switching Power as an power source.
Specification
Operating voltage
DC 11~18 volts
AC 100~240V, 50/60Hz
Charge/discharge power
max. 50/5 Watts
NiCd/MH
1~15 cells
LiIo/LiPo/LiFe
1~6 series
Pb
2~20V
Charge current
0.1 to 5.0A
Discharg current
0.1 to 1.0A
No. of cycle
1 to 5 times
Battery data memory
up to 5 data
Weight
1000g
Dimension
160x120x40 mm
User's setting-up parameters
Battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
1 to 20mV
NiMH Delta-peak voltage sensitivity
1 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waiting time between charge/discharge
1 to 60 min.
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
ON/OFF
Input DC power low alert
10 to 11V
Constant Current Switch Power Supply
* Input: 100-240V AC, 50/60Hz 2A
* Output: 12V, 5A
* Perfect for Micro-control LCD Li-Po Ballance Charger
##"Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)"##
No comments:
Post a Comment